学习经历

2006年9月-2010年2月香港城市大学，材料科学与工程系，博士；

2001年9月-2004年7月广西大学，材料所，硕士；

1995年9月-1999年7月太原理工大学，材料科学与工程系，本科。

工作经历

2018年6月-至今 北京工业大学，材料科学与工程学院，副研究员

2010年6月-2018年6月 北京工业大学，激光工程研究院，助理研究员

2004年7月-2006年8月北京石油化工学院，纳米中心，助理研究员

研究兴趣

激光增材制造材料冶金；

金属材料显微组织与力学性能；

电子显微学原位表征。

负责承担的主要科研项目

北京市自然科学基金面上项目，增材制造镍基GH3536合金高温疲劳微裂纹形成微观机制跨尺度原位研究，2023-2025，主持；

GF科技173计划，增材制造过程高温合金组织结构演变及其调控，2021-2024，主持。

中国航发集团产学研项目，增材制造GH3536固溶强化型和GH4169固溶时效强化型镍基高温合金组织相演变规律研究，2022-2023，主持；

国家自然科学基金青年项目：基于动态调控原位XRD激光沉积制造显微组织/应力演化规律研究，2016-2018，主持；

北京市自然科学基金面上项目，Ti-6Al-4V激光选区熔化增材制造原位相变/组织演化研究，2015-2017，主持；

北京市教育委员会科技计划面上项目，2198铝锂合金激光焊接接头腐蚀行为及机理研究，2013-2015年，主持；

企业委托横向项目若干。

发表的部分科研论文情况（近五年）

1.Wenxiang Jiang,Junxia Lu*, uefei Zhang*, Ze Zhang et al., Study of pre-precipitated δ phase promoting deformation twinning and recrystallization behavior of Inconel 718 superalloy during hot compression,Materials & Design, 226 (2023) 111693.

2. Jutian Chen,Junxia Lu*, Yuefei Zhang*, Ze Zhang, et al., In-situ study of adjacent grains slip transfer of Inconel 718 during tensile process at high temperature,International Journal of Plasticity, 163 (2023) 103554.

3. Cao Tianci, Cheng Xiaopeng, Wang Mingming,Lu Junxia, et al., Realizing Holistic Charging-Discharging for Dendrite-Free Lithium Meal Anode via Constructing 3D Li+ Conductive Network,ACS Applied Materials & Interfaces, 15(2023)6666-6675.

4. Mingming Wang, Xiaopeng Cheng*,Junxia Lu, et al., The effect of amorphous coating on high temperature oxidation resistance of Ni-based single crystal superalloy,Corrosion Science, 213 (2023) 111000.

5. Hao Guan, Wenxiang Jiang,Junxia Lu^1*, et al., Precipitation of δ phase in Inconel 718 superalloy: The role of grain boundary and plastic deformation,Materials Today Communications36 (2023)106582.

6. Feiqi Li, Wenxiang Jiang,Junxia Lu^1*, et al., In situ EBSD study of formation and propagation of deformation bands in a single-crystal superalloy during tensile deformation,J Mater Sci(2023) 58:10764-10781.

7. Wenxiang Jiang,Junxia Lu, Yuefei Zhang*, Ze Zhang et al., In-situ EBSD invstigation of the effect of orientation on plastic deformation behavior of a single crystal superalloy,Materials Science & Engineering A,849 (2022) 143453.

8. Xiaoyi Ren,Junxia Lu*, Yuefei Zhang, Ze Zhang et al., In-situ fatigue behavior of a nickel-based single-crystal superalloy with different orientation,Materials Science & Engineering A855 (2022) 143913.

9. Wenjie Gao,Junxia Lu*, Jianli Zhou, et al., Effect of grain size on deformation and fracture of Inconel 718: An in-situ SEM-EBSD-DIC investigation,Mater. Sci. Eng. A, 2022, 861, 144361.

10. Muhammad Rizwan,Junxia Lu*, Rafi Ullah, et al., Microstructural and texture evolution investigation of laser melting deposited TA15 alloy at 500℃using in-situ EBSD tensile test,Mater. Sci. Eng. A, 2022, 857, 144062.

11. Wenling He,Junxia Lu*, Feiqi Li, et al., In-situ SEM study of creep deformation behavior of nickel-based single-crystal superalloy,Journal of Materials Science,57 (2022) 13647-13659.

12. Xiaopeng Cheng, Yonghe Li,Junxia Lu*, Yuefei Zhang, et al., Real-time observation of chemomechanical breakdown in a layered Nickel-rich oxide cathode realized by in situ scanning electron microscopy,ACS Energy Lett. (Letters), 6(2021)1703-1710.

13. Liang Tang, Xiaopeng Cheng,Junxia Lu, Yuefei Zhang, et al., Monitoring the morphology evolution of LiNi_0.8Mn_0.1Co_0.1O₂during high-temperature solid state synthesis via in situ SEM,Journal of Energy Chemistry, 66(2021)9-15.

14. Junxia Lu*,Qi Zhu, Jin Wang,et al., Diffusive crack-grain interplay in freestanding nanocrystalline silver thin film,Materialia, 17(2021) 101116.

15. Lijun Sang,Junxia Lu*, Jin Wang,et al.In-situ SEM study of temperature-dependent tensile behavior of Inconel 718 superalloy,J. Mater. Sci., 2021, 56, 16097.

16. Rafi Ullah,Junxia Lu*, Lijun Sang,et al., Investigating the microstructural evolution during deformation of laser additive manufactured Ti-6Al-4V at 400℃using in-situ EBSD,Mater. Sci, Eng. A, 2021, 823, 141761.

17. Muhammad Rizwan,Junxia Lu*, Fei Chen,et al., Microstructure evolution and mechanical behavior of laser melting deposited TA15 alloy at 500℃under in-situ tension in SEM,Acta Metallurgica Sinica (English Letters), 2021, 34, 1201.

18. Jinyao Ma,Junxia Lu, Yuefei Zhang, Ze Zhang,et al.,A novel instrument for investigating the dynamic microstructure evolution of high temperature service materials up to 1150℃in scanning electron microscope,Review of Scientific Instruments, 91, 043704 (2020).

19.Rafi Ullah,Junxia Lu*,Lijun Sang,et al.. In-situ tensile deformation behavior of as-built laser direct metal deposited Ti–6Al–4V alloy at 200 ℃,Journal of Alloys and Compounds, 817 (2020) 152781.

20. Wenjing Zhang,Junxia Lu*, Jin Wang, et al. In-situ EBSD study of deformation behavior of Inconel 740H alloy at high-temperature tensile loading,Journal of Alloys and Compounds, 820 (2020) 153424.

21. Jin Wang,Junxia Lu*, Xiaoxiao You, et al., In-situ comparison of deformation behavior at 23℃and 650℃of laser direct melting deposited Ti-6Al-4V alloy,Materials Science & Engineering A，749 (2019) 48-55.

22.Xiaopeng Cheng, Jianming Zheng,Junxia Lu, et al.. Realizing superior cycling stability of Ni-Rich layered cathode by combination of grain boundary engineering and surface coating,Nano Energy62 (2019) 30-37.

讲授课程

《激光加工材料冶金学》（硕士，博士）

《微纳米力学》（本科生）

招生对象

具有金属材料学、物理学基础的学生